Reset your Holosun EPS Carry Red Dot Sight

Wiki Article

Occasionally, you may want to restore your Holosun EPS Carry Red Dot sight to its factory settings. This can be helpful if you've been tinkering with the settings or are experiencing unexpected issues. Fortunately, resetting your Holosun is a straightforward process that can be performed in just a few actions.

• Initially ensuring your red dot sight is turned on.
• Locate the small button for reset on the bottom of the sight.
• Use a paperclip to depress the reset switch for approximately three moments.
• Let go the lever and your Holosun EPS Carry Red Dot sight will power cycle.
• Its red dot sight should now be returned to its factory settings.

Return to Your Holosun EPS Carry Red Dot to Defaults

In case you've tweaked your Holosun EPS Carry red dot settings and want to start fresh, resetting it back to standard configuration is a breeze. First, determine the tiny button on the bottom of your optic. Then, press and hold it for around five seconds until you see the red dot blink. Your Holosun EPS Carry is now reverted to its factory settings, ready read more for precise aiming.

restore Your Holosun EPS Carry Back to : Functionality

Is your beloved Holosun EPS Carry experiencing some issues? Don't despair! A simple factory reset can often fix the problem and get your red dot sight back to its former glory. Before you begin, remember to disconnect the battery from your Holosun EPS Carry to prevent accidental activation during the process.

To perform a factory reset on your Holosun EPS Carry, follow these easy steps:

• Hold down the power button for approximately 10 seconds.
• An indicator will flash, indicating that the reset is in progress.
• Release the power button once the reset is complete.

Your Holosun EPS Carry should now be back to its factory settings. You can insert the battery and confirm your sight's functionality. If you encounter any further problems, don't hesitate to seek help from Holosun's support.

Restore Factory Settings on Your Holosun EPS Carry: A Step-by-Step Guide

Resetting your Holosun EPS Carry to factory settings can be a helpful solution if you're experiencing issues with the optic or simply want to start fresh. This process erases all user configurations and returns the sight to its original state. Before proceeding, remember to note down any customizations you have made as they will be lost during this process. Adhere to these steps carefully to ensure a successful factory reset.

• First, Turn on your Holosun EPS Carry by pressing the power button.
• After that, press and hold both the mode button and the up/down adjustment button simultaneously.
• As you continue holding these buttons, press the power button once.
• You will show a confirmation prompt indicating that the reset process is initiated.
• Allow the process to finish. This may take a few moments. Once done, your Holosun EPS Carry will automatically power off.

After resetting your Holosun EPS Carry to factory settings, you will need to re-enter any desired customizations, such as brightness levels and reticule style. Refer to the user manual for detailed instructions on configuring your optic after a reset.

Erase All Settings on Your Holosun EPS Carry

To Original reset your Holosun EPS Carry sight, you'll need to access the settings menu. This can usually be done by Pressing a specific button combination. Consult your Manual for the exact button sequence for your model. Once in the settings menu, look for an option that says "Reset All". Select this option and confirm the reset. Your sight will then power off and restart with all settings Reinitialized to their default values.

Reset your Holosun EPS Carry via a Factory Standard Settings

If your Holosun EPS Carry is acting funny, a factory reset might be the answer. This will set back your sight to its factory settings, clearing any personalized configurations you've made. To accomplish this reset, observe these easy steps:

• First, find the reset button on your EPS Carry.
• Next, use a thin object, like a pen tip, to activate the reset lever.
• As you maintain the reset button pressed, turn your EPS Carry.
• The sight will blink a message indicating that the reset is successful.

After the reset is successful, your EPS Carry will be returned to its factory settings.

Report this wiki page